Difference between revisions of "Action Parts"

From The Official Visionaire Studio: Adventure Game Engine Wiki
Line 483: Line 483:
 
=== Play/Hide animation ===
 
=== Play/Hide animation ===
  
Play or Stop the linked <span style="color:green">animation</span>; the animation will play forward unless <span style="color:green">Play in reverse order</span> is checked.
+
Play (and show) or stop (and hide) the linked <span style="color:NavajoWhite">Animation</span>. The animation will play forward unless <span style="color:NavajoWhite">"Play in reverse order"</span> is checked.
  
If <span style="color:green">Wait until animation is finished</span> is checked then the action parts listed after this one will not be performed until the animation has finished; it will never end if animation is being looped unless you manually hide/stop the animation.
+
If <span style="color:NavajoWhite">"Wait until animation is finished"</span> is checked then the action parts listed after this one will not be performed until the animation has finished; it will never end if the animation is being looped unless you manually hide/stop the animation.
  
  
 
=== Wait until animation is finished ===
 
=== Wait until animation is finished ===
  
This action part prevents all other actions listed after this one from being performed until the linked <span style="color:green">animation</span> finishes or is manually stopped; this action part should be used if you set an animation playing but wanted to perform a few action parts after the animation & then wait until the linked <span style="color:green">animation</span> has finished playing before carrying on with the rest of the listed actions.
+
This action part prevents all other actions listed after this one from being performed until the linked <span style="color:NavajoWhite">Animation</span> finishes or is manually stopped.
 +
 
 +
This action part should be used if you set an animation playing but wanted to perform a few action parts after the animation and then wait until the linked animation has finished playing before carrying on with the rest of the listed actions.
  
  
 
=== Preload/Unload animation ===
 
=== Preload/Unload animation ===
  
Stores or removes the linked <span style="color:green">animation</span> to/from memory; the animation will be stored to memory, so you don't have to reload it each time you enter the scene - until you unload the animation.
+
Stores or removes the linked <span style="color:NavajoWhite">Animation</span> to/from memory. The animation will be stored to memory, so you don't have to reload it each time you enter the scene until you unload the animation.
 +
 
 +
The engine usually handles the loading and unloading of animations automatically, so use this action part only if you know what you are doing. Manually preloaded animations will stay in memory until manually unloaded again.
  
  
 
=== Preload/Unload character ===
 
=== Preload/Unload character ===
  
Stores or removes the selected <span style="color:green">character</span> to/from memory; all the characters animations (for each outfit) will be stored to memory so you can instantly switch between outfits without having to wait for them to load - until you unload the character.
+
Stores or removes the selected <span style="color:NavajoWhite">Character</span> to/from memory. All the characters animations (for each outfit) will be stored to memory so you can instantly switch between outfits without having to wait for them to load until you unload the character.
 +
 
 +
The engine usually handles the loading and unloading of animations automatically, so use this action part only if you know what you are doing. Manually preloaded animations will stay in memory until manually unloaded again.
  
  
 
=== Change position of an animation ===
 
=== Change position of an animation ===
  
Set the current <span style="color:green">position</span> (x,y) of the linked <span style="color:green">animation</span> via one the <b>Operators</b> & the specified <span style="color:green">value</span>.
+
Set the <span style="color:NavajoWhite">Position</span> of the linked <span style="color:NavajoWhite">Animation</span> via one the <span style="color:NavajoWhite">Operators</span> and the specified x,y values.
  
<div class="toccolours mw-collapsible mw-collapsed ts">
+
* [ = ] absolutely position the animation to the x,y position provided
<b>Operators</b>
+
* [ + ] add the x,y position values to the current x,y position of the animation
<div class="mw-collapsible-content">
+
* [ - ] subtract the x,y position values from the current x,y position of the animation
<div style="background:#ebebeb" width="100%">Equals[=] absolutely position the animation to the x,y <span style="color:green">position</span> provided</div>
 
<div>Add[+] add the x,y <span style="color:green">position</span> values to the current x,y position of the animation</div>
 
<div style="background:#ebebeb" width="100%">Subtract[-] remove the x,y <span style="color:green">position</span> values from the current x,y position of the animation</div>
 
</div></div>
 
  
  

Revision as of 14:04, 8 October 2022

Action part selection dialog

By default, the action part selection dialog (see image) pops up when adding a new action part to an action (you can disable this in the options). The dialog shows all 100+ available action parts grouped by categories on the right hand side. Click on one of the buttons to open up a category list and choose the desired action part. The action parts you use the most will be listed on the left hand side for quick & easy access (double-click to select). There is also a search field available.

You can always change the type of action part after you added it. Just choose another part from the list at the top of the action part properties area.

Visionaire Studio offers the possibility to create your own action parts through plugins. If you have installed such plugins, you will not find the custom action parts in the action part selection dialog but only at the very bottom of the list (so add a random action part from the dialog first and change it afterwards).


You can find a complete list of available action parts below.



Character

Display text

Displays the included Text over the top of the linked Character's head. If the current outfit includes a talking animation, it is automatically started. If an audio file has been included, it is played.

  • If "Show as background text" is not checked, the cursor gets hidden while the text is displayed. The user may then skip the text by clicking the left mouse button (unless the cursor was manually hidden prior to calling the action part). All action parts listed after "Display text" will not be performed until the displayed text has finished being displayed.
  • If "Show as background text" is checked, the user can perform actions while the text is being displayed. Use it to implement conversations by people in the background. Background text cannot be skipped. All action parts listed after "Display text" will continue to be executed without waiting for the text display to finish. You can use the "Wait until character stops speaking" action part to prevent this.


Wait until character stops speaking

Prevents action parts listed after this one from being performed until the selected Character has stopped talking. This is especially useful when dealing with background text.


Send character to position

Send the selected Character to a specified Position. Make sure the position is inside of the way border polygon.

If "Wait until character reached destination" is checked, all action parts listed after this, will not be performed until the character has reached the specified destination.


Send character to object

Send the selected Character to the linked Objects position. Make sure the character and object are on the same scene.

If "Wait until character reached destination" is checked, all action parts listed after this, will not be performed until the character has reached the linked object.


Wait until character stops

Prevents action parts listed after this one from being performed until the selected Character has stopped walking. This action part should only really be used during cut-scenes; when the player has no control over the character or its position and/or destination.


Stop character

This action part will cancel the linked Characters destination and stop it at its current position. It has no effect, if the character is currently not walking.


Align character

This action part allows you to realign the selected Character towards a new Direction or towards an Object. If you link an object, the linked direction is ignored.


Set character to position

This action part allows you to instantly teleport the selected Character to a specified Position in the selected Scene and control the Direction the character should be facing.


Set character to object

This action part allows you to instantly teleport the selected Character to a linked Object's position and control the Direction the character should be facing. The character and object should be in the same scene.


Change character

This action part allows you to change the current playable Character. If the new playable character is in a different scene than the previous one, the engine will automatically switch scenes.

You can switch to the new scene instantly or you can fade out of the current scene and into the next. If you choose the latter, you may adjust the transition effect and duration through the "Set fade effect to new scene" action part.


Change outfit

This action part allows you to change the linked Characters Outfit. If "Do not unload old outfit animations" is checked, the previous outfits animations will be stored in memory so they don't have to be reloaded if you change back to them later on.


Change comment set

This action part allows you to change the default comment set of what is to be displayed when a character performs an invalid action. This could be changed to display comments which reflect the character's current mood.


Change walking sound

This action part allows you to change the footstep sounds of the selected Character to the linked Sound file.


Change font of a character

This action part allows you to change the default Font for the selected Character. That's the font that is used for displaying texts when the character speaks.


Change character speed

This action part allows you to control the selected Characters walking speed. This could be used for controlling when a character walks, runs or the speed the character should move over a specific area of terrain.


Change character animation index

Changes the animation index of a Character (default is 0 when the game is started). This index is used for talk, random and stand animations. If more than 1 animation exists for a direction then this index decides which animation is shown.

Example: A character has 8 talk animations, 2 for each direction (0, 90, 180, 270 degrees). If the index is 0 then the first of the two animations (for a direction) is shown. If the index is 1 then the second animation is shown.

With this index it is possible to have different animations (e.g. talking friendly / neutral / angry) without changing the complete outfit.


Chase character

Allows you to make a character follow/chase another Character (or vice versa). Both characters must be in the same scene. The chasing character will keep the distance set in "Range". If it gets closer, the linked Action gets executed. Use the "Stop chase" action part to stop the chase.


Stop chase

Stops the selected Character from chasing another character (as started through the "Chase character" action part).


Show/Hide character

Show or hide the selected Character. A hidden character is not only invisible but completely disabled, i.e. you cannot interact with it, whereas a character with 0% visibility (see the "Set character visibility" action part) still gets recognized by the cursor.


Set character visibility

Allows you to set the visibility (opacity) of the selected Character in percent. By setting the Delay [ms], you can also control how long it should take (in milliseconds) to change from the current opacity to the new opacity amount. If a value is linked to Visibility (value), it will be used instead of the Visibility [%] value.

A character with 0% visibility is invisible, but the user can still interact with it. If you want to completely disable a character (remove it from the scene), use the "Show/Hide character" action part.


Start dialog/dialog-layer

Starts a dialog between the current character and a partner. You can link a Dialog that has been created on the "Dialogs" tab of the addressed character. Following action parts will be executed immediately so take care if this is not the last action part of the listed actions.


Stop dialog

Stop dialog action part restriction.png

Allows you to manually stop and close the currently running dialog.

Note that this action part only works, if it is used inside of the first action called by the dialog (see image)!


Scene

Start color overlay

Covers the screen with a color panel. You can set the Color, the Visibility (opacity) value, and the amount of time in milliseconds that the fading should take. The overlay does not only cover the scene but the entire game screen, including interfaces and cursor. It is not limited to the current scene; if you change to another scene or menu, the color overlay will stay. Even if at 100% opacity the user will still be able to play the game, although he won't see anything. Use this action part with a visibility setting of 0% to remove the overlay.


Change scene

Allows you to change to a new scene and teleport the selected Character (usually the current character). You set the new scene indirectly by choosing an object on that scene for "Character stands at". You may also define the direction the character should be facing.

You can switch to the new scene instantly or you can fade out of the current scene and into the next. If you choose the latter, you may adjust the transition effect and duration through the "Set fade effect to new scene" action part.


Show scene/menu

Allows you to switch to a new scene or menu without having to teleport a character. This is useful for switching to menus or to a scene in which you want to show a cut-scene.

You can switch to the new scene instantly or you can fade out of the current scene and into the next. If you choose the latter, you may adjust the transition effect and duration through the "Set fade effect to new scene" action part.


Scroll scene to position

This action part scrolls the current scene to the specified Position. The scene must be scrollable, i.e. it has to be larger than the game resolution. If you use this action part in a scene where the playable character is located, the scene may immediately scroll back to center on the current character again which is the default behaviour. You can stop centering on the current character through the "Center scene on character permanently" action part.


Scroll scene to object (centered)

This action part scrolls the current scene until the linked Object is in the center of the scene. The object must be in the current scene and the scene must be scrollable, i.e. it has to be larger than the game resolution. If you use this action part in a scene where the playable character is located, the scene may immediately scroll back to center on the current character again which is the default behaviour. You can stop centering on the current character through the "Center scene on character permanently" action part.


Center scene on character permanently

By default, a scrollable scene is centered on the current character's position. With this action part you can choose any Character to have the scene centered on or stop centering the scene on a character at all by checking "Clear centering". This action part is intended for using in cut-scenes or when you don't want the scene to be focused on the currently playable character.


Change to scene of a character

Changes to the scene where the selected Character is located. This action part is mostly used to switch back from menu scenes to the scene where your playable character is located.

You can switch to the new scene instantly or you can fade out of the current scene and into the next. If you choose the latter, you may adjust the transition effect and duration through the "Set fade effect to new scene" action part.


Set fade effect to new scene

Let's you control the transition Effect and the amount of time ("Delay") in milliseconds that the transition should take when changing from one scene to another using the fade option. The settings of this action part apply to all forthcoming scene changes until you use the action part again.


Set object visibility

Allows you to set the visibility (opacity) of the selected Object in percent. By setting the Delay [ms], you can also control how long it should take (in milliseconds) to change from the current opacity to the new opacity amount. If a value is linked to Visibility (value), it will be used instead of the Visibility [%] value.

An object with 0% visibility is invisible, but the user can still interact with it. If you want to completely disable an object, you have to work with a condition or value.


Move object

This action part moves a scene Object by the given amount of X and Y distance. You can set the speed of movement by defining the Duration in milliseconds. The movement is linear.


Move object to

This action part moves a scene Object to the selected position. You can set the speed of movement by defining the Duration in milliseconds. The movement is linear.


Change way system

Allows you to change the current way system for any scene by linking to another Way system. This could be used to change the walkable area due to something being changed in a scene; for example: an earthquake or explosion blocks part of the scene.


Set lightmap

Sets the linked Image file as the new lightmap for the selected Scene. You can define the transition duration in milliseconds.


Set brightness

Allows you to control the Brightness of the selected Scene in percent.


Fade "snoop" animations in/out

This action part allows you to fade in/out the objects' snoop (hotspot) animations for the current scene. The fading time ("Delay") can be set in milliseconds. In general it's a good idea to add this action part to a "key pressed" action (fade in) and to a "key released" action (fade out).


Set horizontal scroll area

By default, a scene wider than the game's width can be scrolled from the left to the right border of the scene background image. With this action part it is possible to limit the horizontal scroll area of the Scene. "Left border" sets the left border of the background image where the scene can be scrolled to (default is 0), "Right border" the right border analogous (default is width of background image).


Set vertical scroll area

By default, a scene higher than the game's height can be scrolled from the top to the bottom border of the scene background image. With this action part it is possible to limit the vertical scroll area of the Scene. Top border sets the top border of the background image where the scene can be scrolled to (default is 0), Bottom border the bottom border analogous (default is height of background image).


Keep scene in memory

This action part allows you to store various things from the current scene into memory for the set amount of scene changes. This is useful for when you want to change to a new scene (cut-scene maybe) & then back again without having to wait for the images & animations etc. to reload.


Condition, If, Value

If character has item

Only perform the actions wrapped in the query, if the selected Character owns the selected Item (has it in his inventory); else continue with the next "else if" or "else" criteria (if provided) or end the query. See the conditions and values page on how to build "if…else" queries.

You can turn this action part into an "else if" by checking ElseIf.


If Lua result

Only perform the actions wrapped in the query, if the entered Lua Script returns "true"; else continue with the next "else if" or "else" criteria (if provided) or end the query. See the conditions and values page on how to build "if…else" queries.

-- Example: returns "true" if the cave scene is the current scene
return game.CurrentScene == Scenes["cave"]

You can turn this action part into an "else if" by checking ElseIf.


Wait until value was changed

Prevents action parts listed after this one from being performed until the selected Value has changed as defined by the following Operators.

  • [ ValueChanged ] queries if the current Value has changed
  • [ = ] queries if the current Value equals the second linked Value or the number provided
  • [ != ] queries if the current Value does not equal the second linked Value or the number provided
  • [ <= ] queries if the current Value is less than or equal to the second linked Value or the number provided
  • [ < ] queries if the current Value is less than the second linked Value or the number provided
  • [ >= ] queries if the current Value is more than or equal to the second linked Value or the number provided
  • [ > ] queries if the current Value is more than the second linked Value or the number provided


Wait until condition was changed

Prevents action parts listed after this one from being performed until the linked Condition has changed to "true" or "false" – or has just changed.


Start tween on value

This action part increases or decreases the linked Value over time (defined in milliseconds) to match a target value, provided as a fixed Target number or by linking another value ("TargetValue"). The value tween can be used with the sound system to control volumes, for example.


Change condition

Allows you to change the boolean value of the linked Condition to "true" or "false" or to toggle the state (set the value opposite to the current one).


Set value

Allows you to change the integer value of the linked Value with one of the Operators listed below.

  • [ = ] allows you to set the current Value to the second linked Value or number provided
  • [ + ] allows you to add the second linked Value or number provided to the current Value
  • [ - ] allows you to subtract the second linked Value or number provided from the current Value
  • [ * ] allows you to multiply the current Value with the second linked Value or number provided
  • [ / ] allows you to divide the current Value with the second linked Value or number provided


Set random value

Allows you to set the linked Value to a random value from the defined range of numbers.


If condition

Only perform the actions wrapped in the query, if the linked Condition equals the boolean "true" or "false" value you selected; else continue with the next "else if" or "else" criteria (if provided) or end the query. See the conditions and values page on how to build "if…else" queries.

You can turn this action part into an "else if" by checking ElseIf.


If value

Only perform the actions wrapped in the query, if the linked Value matches one of the specified criteria in the Operators listed below; else continue with the next "else if" or "else" criteria (if provided) or end the query. See the conditions and values page on how to build "if…else" queries.

  • [ = ] queries if the current Value equals the second linked Value or the number provided
  • [ != ] queries if the current Value does not equal the second linked Value or the number provided
  • [ <= ] queries if the current Value is less than or equal to the second linked Value or the number provided
  • [ < ] queries if the current Value is less than the second linked Value or the number provided
  • [ >= ] queries if the current Value is more than or equal to the second linked Value or the number provided
  • [ > ] queries if the current Value is more than the second linked Value or the number provided


You can turn this action part into an "else if" by checking ElseIf.


If character is on scene

Only perform the actions wrapped in the query if the selected Character is on the selected Scene; else continue with the next "else if" or "else" criteria (if provided) or end the query. See the conditions and values page on how to build "if…else" queries.

You can turn this action part into an "else if" by checking ElseIf.


If character is current character

Only perform the actions wrapped in the query, if the selected Character is the character you are currently controlling; else continue with the next "else if" or "else" criteria (if provided) or end the query. See the conditions and values page on how to build "if…else" queries.

You can turn this action part into an "else if" by checking ElseIf.


If character is aligned to

Only perform the actions wrapped in the query, if the selected Character is facing in the given Direction. You can define a Range of direction angles, either around the direction set in the widget ("+/-") or starting at that direction ("from-to"). See the conditions and values page on how to build "if…else" queries.


If language is current language

Only perform the actions wrapped in the query, if the selected Language equals the current language being used; else continue with the next "else if" or "else" criteria (if provided) or end the query. See the conditions and values page on how to build "if…else" queries.

You can turn this action part into an "else if" by checking ElseIf.


If command is current command

Only perform the actions wrapped in the query, if the current command being used equals the selected Command; else continue with the next "else if" or "else" criteria (if provided) or end the query. See the conditions and values page on how to build "if…else" queries.

You can turn this action part into an "else if" by checking ElseIf.


If current object ...

Only perform the actions wrapped in the query if the current position of the mouse cursor meets the selected criteria listed in Objects below; else continue with the next "else if" or "else" criteria (if provided) or end the query. See the conditions and values page on how to build "if…else" queries.

  • "exists": only perform the listed actions if an object is under the mouse cursor
  • "does not exist": only perform the listed actions if an object is not under the mouse cursor
  • "is a scene object": only perform the listed actions if a scene object is below the mouse cursor
  • "is an item": only perform the listed actions if an item is under the mouse cursor
  • "is a character": only perform the listed actions if a character is under the mouse cursor


You can turn this action part into an "else if" by checking ElseIf.


If savegame/autosave exists

Only perform the actions wrapped in the query, if a savegame or the specified autosave number exists; else continue with the next "else if" or "else" criteria (if provided) or end the query. See the conditions and values page on how to build "if…else" queries.

You can turn this action part into an "else if" by checking ElseIf.


Else

Only perform the following actions if neither the initial "if" criteria of this "if…else" query nor any following "else if" criterias are met. See the conditions and values page on how to build "if…else" queries.


End if

This action part is used to end an "if…else" query. There should be the same amount of "end if", as "if" action parts (with additional "if else" action parts optionally in-between). In other words: always end your "if…else" queries with this action part. See the conditions and values page on how to build "if…else" queries.


Interface

Add/Remove item

Adds or removes the selected Item to/from the selected Character's inventory. If "Scroll to added item" is checked, the items in the inventory interface will scroll to the end so that the newly added item is visible (this option has no effect when removing an item).

There can only be one instance of an item per inventory, so if you try to add an item that is already part of the inventory, nothing happens. The inventory won't scroll to that already present item either. If you try to remove an item that is not part of the inventory, again nothing happens.


Remove all items from character

Removes all items from the selected Character.


Give all items to other character

Transfers all items from the selected Character's inventory' to another Character's inventory. Note that the order of the items will not necessarily be preserved.


Save object

Saves the object which is currently under the mouse cursor to memory.

This action part is usually used in conjunction with the Set command, Execute command on saved object and Clear saved object action parts. You may use them to build a "coin" type interface.


Execute command on saved object

The currently set command is being executed on a previously saved object.

This action part is usually used in conjunction with the Set command, Save object and Clear saved object action parts. You may use them to build a "coin" type interface.


Clear saved object

Removes the currently saved object from memory. If no object is currently stored/saved, then do nothing.

This action part is usually used in conjunction with the Set command, Save object and Execute command on saved object action parts. You may use them to build a "coin" type interface.


Enable/Disable all interfaces

This allows you to globally enable or disable all interfaces at the same time. Currently visible interfaces get hidden when being disabled and shown again when being enabled again. "Enabling all interfaces" does not mean that all the game's interfaces are shown at once.


Show/Hide interface

Allows you to show, hide or toggle the interfaces of the selected Interface class.


Set interface visibility

Allows you to set the Visibility (opacity) for the interfaces of the selected Interface class in percent and set a Delay time (in milliseconds), for how long it should take to change opacity.

Even if set to 0% opacity, the interface is accessible. Use the Show/Hide interface action part, if you want to really hide it from the user.


Set active/inactive image

Allows you to set the active or inactive image for the linked interface Button. This would normally be used in actions with "Cursor enters object area"/"Cursor leaves object area" execution type, to show the button is active or inactive.


Set interface of a character

Allows you to assign an Interface to a character. Since only one interface per interface class can be active/assigned, using this action part will automatically set any other interface from the same interface class inactive.


Set command

Saves the selected command to memory to be executed later on.

This action part can be used in conjunction with the Save object, Execute command on saved object and Clear saved object action parts to build a "coin" type interface.


Set cursor

Allows you to change the current mouse Cursor to another one.


Set item

Sets the currently held item to the selected Item. If "Dragged item" is checked, then the item is shown as if dragged from the inventory (replaces the mouse cursor).


Animation

Play/Hide animation

Play (and show) or stop (and hide) the linked Animation. The animation will play forward unless "Play in reverse order" is checked.

If "Wait until animation is finished" is checked then the action parts listed after this one will not be performed until the animation has finished; it will never end if the animation is being looped unless you manually hide/stop the animation.


Wait until animation is finished

This action part prevents all other actions listed after this one from being performed until the linked Animation finishes or is manually stopped.

This action part should be used if you set an animation playing but wanted to perform a few action parts after the animation and then wait until the linked animation has finished playing before carrying on with the rest of the listed actions.


Preload/Unload animation

Stores or removes the linked Animation to/from memory. The animation will be stored to memory, so you don't have to reload it each time you enter the scene – until you unload the animation.

The engine usually handles the loading and unloading of animations automatically, so use this action part only if you know what you are doing. Manually preloaded animations will stay in memory until manually unloaded again.


Preload/Unload character

Stores or removes the selected Character to/from memory. All the characters animations (for each outfit) will be stored to memory so you can instantly switch between outfits without having to wait for them to load – until you unload the character.

The engine usually handles the loading and unloading of animations automatically, so use this action part only if you know what you are doing. Manually preloaded animations will stay in memory until manually unloaded again.


Change position of an animation

Set the Position of the linked Animation via one the Operators and the specified x,y values.

  • [ = ] absolutely position the animation to the x,y position provided
  • [ + ] add the x,y position values to the current x,y position of the animation
  • [ - ] subtract the x,y position values from the current x,y position of the animation


Action, Script

Call/Quit action

Performs or Stops the linked called by other action.


Quit current action

All action parts listed after this one will be cancelled!


Jump to action part

Allows you to jump forwards or backwards to a certain action part via the value you set in Skip action parts; this action part can be used to create a loop by wrapping it inside of an if else query & having it jump back to the action part containing the if condition or value & will only continue the action parts listed after the jump to action part if the condition/value criteria are met.

Jump relative allows you to skip x action parts forward or backwards, whereas ...
Jump absolute allows you to jump to the action part value you set in Skip action parts.


Call script

Allows you to call a script which is assigned as an execution script.


Execute a script

Allows you to call a global function or variable function or even write a custom script inside of the action part editor section.

Example of calling a global function or variable function:

-- this is how we call a global function assigned in a definition script
function_name() -- yes, it's as simple as calling the function name & adding closed brackets afterwards
-- now let's call a variable function which should also be assigned in a definition script!
function_name("string", integer, bool) -- text should be wrapped in " or ' & integers are number values, bool = true or false!

-- let's say we have a function which allows us to add a number to an integer variable
addValue(10) -- this adds 10 to the current integer value

-- the function inside of the definition script may look something like this ...
function addValue(i) -- "i" being what we replaced with "10" (above)
 count = count + i -- this adds the value stored in i to the current value!
 print('the old value was ' .. count - i .. ', the new value is ' .. count .. '!') -- print old/new values to the log file
end


Comment

tbd


If ilios script true

tbd


Run ilios script

tbd


Multimedia

Set audio bus

tbd


Fade audio container in/out

tbd


Fade sound

tbd


Play sound

Play the selected sound file & set the volume & left/right audio balance; only mono channel sounds can be panned.


Play and loop sound infinitely

Same as Play sound action part, apart from the selected sound will continue to loop until it is stopped via the Stop currently playing sound action part.


Stop currently playing sound

Stops the selected sound file from playing; if the selected sound file is not playing then do nothing.


Wait until sound is finished

Wait until the selected sound file has finished playing; all action parts listed after this action will not be performed until the sound file has finished playing.


Change background music

Allows you to change the background music file for the selected scene & set the volume & left/right audio balance; only mono channel sounds can be panned.


Change volume

Change the volume level for: music, sound, speech, movies & global by using one of the operators & setting a volume value.

Operators

Equals[=] set the selected volume level to the value provided
Add[+] add the volume value to the currently selected volume level
Subtract[-] remove the volume value from the currently selected volume level


Change settings of currently playing sound

Allows you to edit the volume level & left/right audio balance of a currently playing sound; if the selected sound file is not currently playing, then this action part will have no effect.


Play video

Allows you to play the selected video file, declare if video should be scaled to users screen resolution & decide what the currently playing active sounds should do while video is playing or after it has finished!

Active sounds

Only resume in same scene: all active sounds will be paused & only resumed if the scene is not changed after the video has finished playing
Pause and resume: all active sounds will be paused & resumed after the video has finished regardless of if the scene has been changed or not
Continue: all active sounds will continue playing throughout & after the video has finished playing
Stop: all active sounds will be stopped & not resumed after video has finished playing


Savegame

Load/Execute autosave

Allows you to load or save from/to the currently allocated autosave value.


Load/Save game

Allows you to load or save from/to the currently selected save slot; bearing in mind that all new saves will automatically be added to the first empty save slot as opposed to the actual selected one, if the currently selected save slot doesn't already contain a save game.


Show next/previous savegames

This action part allows you to scroll through the save slots; providing you decide not use a set amount of save slots.


Delete savegame/autosave

Allows you to delete a save from the currently selected save game slot or to delete the allocated autosave value; if provided.


Miscellaneous

Begin/End of cutscene

Allows you to start or stop a cut-scene; cut-scenes are scenes containing none playable scenarios in which the player has no control over what is happening on the screen.


Pause

Allows you to set a pause/delay between action parts; in other words all action parts listed after pause will not be resumed until after the pause time value has been reached. This is especially useful for controlling loops & what is happening on the screen.


Set text and voice output

This action part allows you to determine if both spoken text (subtitles) & speech (audio) should both be shown/played or whether to only show the spoken text or play the speech.

Output options

Text and speech output: both text (subtitles) & speech (audio) will be shown/played
Only speech output: only speech (audio) will be played
Only text output: only text (subtitles) will be displayed


Display narration text

This is essentially narration text & is not spoken by characters. The text in this action part can be manually positioned anywhere on the screen unlike the character > display text action part.

Additional Info

Display narration text, formerly known as Display speaker text


Display object text

Allows you to assign a display text to a scene object or interface button & display indefinitely; or at least until the displayed text is hidden with the Hide object text action part.


Hide object text

Use this to hide a displayed text created with the Display object text action part.


Skip current text

Skips the currently displayed spoken text or narration text; not applicable to background texts.


Set speed for text output

Allows you to speed up or slow down the text output by x percentage based on whatever pause value you add to your displayed text.


Show/Hide cursor

Show or hide the mouse cursor. Warning! hiding the mouse cursor kills all input methods; meaning that neither the mouse, nor keyboard will work until the cursor is unhidden.


Start/Stop earthquake

Play god by starting or stopping an earthquake. You can also control the force & speed of the screen shake.


Change language

Allows you to change between the languages you have setup; language controls which text & speech files will be displayed/played.


Quit game

Allows you quit the game executable & go back to the desktop.


Contents